Sanyo PLV-Z2000 Manual do Utilizador descarregar pdf (Página 26)

HDMI 1 or HDMI 2

When the video signal is connected to the HDMI 1 or HDMI 2

terminals, select HDMI 1 or HDMI 2 respectively.

The projector automatically detects the incoming video signal and

adjusts itself to optimize its performance.

If the output signal of video equipment and the input signal of the

projector do not match, you might not get an image with the best

quality.

If the blacks of the picture appears unclear (too dark or too light),

try “HDMI 1 setup” or “HDMI 2 setup” in the Setting Menu on

page 38.

When the signal is connected to the COMPUTER connector, select

Computer.

RGB (Analog)

When the input source is analog coming from

a computer connected to the COMPUTER

connector, select RGB (Analog).

RGB (Scart)

When the input terminal is Scart with a DVD

player connected to the COMPUTER connector,

select RGB (Scart).

Source Select Menu

Computer

Input

Computer

Press the Point  button

to display the Source

Select Menu.

Use the Point ! buttons

to select the desired

source and press the OK

or Point

 buttons.

The projector automatically tunes to various types of computers

based on VGA, SVGA, XGA, WXGA or SXGA with its Multi-scan

system and the Auto adj. function (see page 34). If “Computer”

is selected as a signal source, the projector automatically detects

the signal format and tunes to project a proper image without any

additional setting. (The signal formats provided in this projector is

shown on page 56.)

Quit

Exit this menu.

Note:

• When switching from HDMI1 to HDMI2 or vice versa, the signal

may be interrupted for a moment depending on the equipment.

Input

http://www.pureglare.com.au

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Comentários a estes Manuais

Sem comentários

Sanyo PLV-Z2000 Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Projetores de dados Sanyo PLV-Z2000