Sanyo VCC-6594 Manual do Utilizador

INSTRUCTION MANUALVCC-6594COLOR CCD CAMERA About this manualBefore installing and using the camera, please read this manualcarefully. Be sure to keep

CONCERNING AUTO-IRIS LENSESDC type auto-iris lensA lens without amplifier circuit that operates only on a DC power source. In general, this type of le

MOUNTING THE LENSPlease use a DC type auto-iris lens (sold separately).Check the lens mountDo not use a lens if the length “L” is more than 5 mm. That

MOUNTING THE LENSRewiring the lens cable in the lens iris plug1 Prepare the lens cable.Cut the cable at the plug, then remove approx. 8 mm of the cabl

CONNECTIONSBasic connection for monitoring or recordingThe peripheral devices (VCR, monitor, lens, etc.), AC adaptorand cables are sold separately.1 M

SETTINGSThe illustration shows the factory default settings for the switches in the camera setup section.The camera settings are described on the assu

SETTINGSElectronic shutter settings and electronic irissettingsWhen all of these switches are down, electronic shutter (1/60 sec orauto iris setting)

SETTINGSBacklight compensation settingThis camera has two different backlightcompensation functions: Normally backlightcompensation switch 6 (MULT) an

SETTINGSWhite balance adjustmentNormally the switch 8 (WB) is set to the down (ATW: auto whitebalance) position and the white balance is adjusted auto

SETTINGSLine phase adjustmentWhen using a camera switcher to connect 2 cameras or more to onemonitor, there may be a vertical roll of the images when

TROUBLESHOOTINGBefore taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform c

SANYO INDUSTRIAL VIDEOCOLOR VIDEO CAMERA LIMITED WARRANTYOBLIGATIONSIn order to obtain warranty service, the product must be delivered to and picked u

SPECIFICATIONSCamera:Scanning system : NTSC standard TV system(525 TV lines, 30 frames/sec.)Interlace : PLL 2:1 interlaceImage device : 1/3 inch solid

1AC6P1P2413--L53H4/US(1101KPS-CZ)21605 Plummer Street,Chatsworth, California 91311Printed in JapanL53H4/US (VCC-6594) GB 2001, 11, 9

Depending on the conditions of use, installation and environment,please be sure to make the appropriate settings and adjustments. If youneed help with

INFORMATION TO USERSafety GuardTHIS SYMBOL INDICATES THAT THERE AREIMPORTANT OPERATING AND MAINTENANCEINSTRUCTIONS IN THE LITERATUREACCOMPANYING THIS

PRECAUTIONSIn case of problemDo not use the camera if smoke or a strange odour comes from theunit, or if it seems not to function correctly. Disconnec

PARTS NAMES1 Video output connector (VIDEO OUT: BNC type)Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.2 Line

PARTS NAMES5 Lens mount capThe cap is installed to protect the lens mount section.Remove the lens mount cap before installing a lens (sold separately)

PARTS NAMES9 Lens iris output connector (LENS)This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.F